Facilities for the fabrication and processing of metallic materials
Portable Test Stand PAS-S from Ceramicx
Open radiant bandwidth Ceramicx' Portable Test Stand allows for quick and consistent heating of materials. The emitters face down and heat a material that is placed on a stainless steel mesh at an easily adjustable distance between 50mm and 200mm, in 50mm intervals. Maximum power output 1.6 kW (2x ceramic heating elements).
The instrument was kindly donated by Backer AB in Sösdala, Sweden.
Location: room M:2383
Oilbath ONE 7 by Memmert
Oilbath furnace made of corrosion-resistant stainless steel, precise electronics and multiple temperature protection. Features digital timer from 1 min. up to 999 hours; Temperature range min. 5°C above ambient up to +200°C at resolution of display and setting accuracy +0,1°C below 99,9°C, 1°C above 100°C.
Location: room M:2383
Oilbath ONE 10 by Memmert
Oilbath furnace made of corrosion-resistant stainless steel, precise electronics and multiple temperature protection. Features digital timer from 1 min. up to 999 hours; Temperature range min. 5°C above ambient up to +200°C at resolution of display and setting accuracy +0,1°C below 99,9°C, 1°C above 100°C.
Location: room M:2383
Linn Electroterm LM 111.10
Small-chamber furnaces for heat treatments at up to 1100°C.
Location: Room M:2383
Carbolite CSF 1200
Laboratory Chamber Furnaces for heat treatments at up to 1200 C.
Location: Room M:2383
Carbolite Vertical
Laboratory Vertical Tube Furnace for heat treatments in controlled atmosphere at up to 1200°C.
Location: Room M:2383
Rolling mill DURSTON C130
Manual rolling mill with the diameter of rolls 60 mm.
Location: room M:2486
Turbula T2F
Shaker mixer for powdered materials.
Location: Room M:2413
Shimadzu AX 120
Analytical Balances.
Location: Room M:2413
ENERPAC BEP102538 K8B
Hydraulic press, 1000 kN force at closing speed 10/2.1(working) mm/s.
Available through the Department of Mechanical Engineering for shared use.
Location: Room M:mechanical workshop
JNH 20 by ‘Jochnick & Norrman AB’
Hydraulic press, 2000 kN force at closing speed 400 mm/s.
Available through the Department of Mechanical Engineering for shared use.
Location: Room M:mechanical workshop